8613816217984
Product Introduction
STD8211 biodegradable hand lay-up resin is suitable for composite hand lay-up processes, structural components (e.g., wind turbine blades), shell manufacturing, and reinforcement. 8211-1 is designed for low-temperature winter environments, while 8211-2 is optimized for high-temperature summer conditions.
Product Features
Rapid curing at low temperatures; two curing speeds adapted for different temperature environments.
Applicable Processes
Hand lay-up, RTM (Resin Transfer Molding), and small product filament winding.
Technical Parameters
|
Resin |
Appearance |
Viscosity at 25°C (mPa·S) |
|---|---|---|
|
8211-1A |
Colorless transparent liquid |
2500-3500 |
|
8211-1B |
Yellow transparent liquid |
100-160 |
|
8211-2A |
Colorless transparent liquid |
4500-6500 |
|
8211-2B |
Yellow transparent liquid |
50-100 |
Process Parameters
|
|
Resin : Hardener |
Weight Ratio |
|---|---|---|
|
Ratio |
8211-1A : 8211-1B |
100 : 30 |
|
Ratio |
8211-2A : 8211-2B |
100 : 30 |
Casting Body Properties
|
Product Code |
8211-1 |
8211-2 |
|---|---|---|
|
Tensile Strength (MPa) |
≥65 |
≥65 |
|
Elongation at Break (%) |
≥5 |
≥6 |
|
Flexural Strength (MPa) |
≥110 |
≥110 |
|
Flexural Modulus (GPa) |
≥3.3 |
≥3.3 |
|
Hardness (Shore) |
>90 |
>90 |
|
Glass Transition Temperature (°C) |
>75 |
>75 |
|
Post-Curing Density (g/cm³) |
1.170-1.180 |
1.165-1.175 |
*Data shown are typical values of cured products and should not be treated as specifications. Curing process: 4h at room temperature + 4h at 80°C.
Gel Time
|
|
25°C |
35°C |
45°C |
65°C |
|---|---|---|---|---|
|
8211-1 |
1h20min±10min |
45min±5min |
23min±2min |
7min±30s |
|
8211-2 |
1h37min±10min |
53min±5min |
28min±2min |
9min±30s |
Packaging Specifications
25Kg, 200Kg, 1000Kg
Storage Conditions & Shelf Life
-
Store in a cool, dry, and clean environment.
-
Seal immediately after use.
-
Shelf life: 12 months in original packaging under proper storage conditions.
Personal Protection
|
PPE |
Impermeable protective gloves to avoid skin contact. |
|
Respiratory Protection |
No special requirements. |
|
Eye Protection |
Chemical splash goggles recommended. |
|
Body Protection |
Wear protective clothing, boots, and gloves. Provide eye wash stations and emergency showers. |
First Aid Measures
Skin Contact
-
Wash thoroughly with soap and water for 5 minutes or until contaminants are removed.
Eye Contact
-
Flush eyes with flowing water or saline solution for 20 minutes.
-
Seek immediate medical attention.
Inhalation
-
Move to fresh air.
-
Seek medical help if symptoms occur.